Victron Energy EV Charging Station
The EV Charging Station has three phase and single-phase capabilities. It delivers maximum 22kW AC in three phase mode or 7.3kW in single phase mode.
It incorporates 4.3-inch LCD touch screen for monitoring and control.
Fully programmable RGB Light Ring around charging port, to quickly determine the device state.
It can be programmed from the web interface to display different light effects based on the current state
(disconnected, charging, charged etc.). The objective is to help the user see the current state from a distance.
Input voltage range (V AC) 170 – 265VAC 50Hz
Rated charge current 32A / phase
Nominal power 22kW
Current output range 6 – 32A
Wi-Fi standards 802.11 b/g/n (2.4Ghz only)
Self-consumption 15mA@230V
Configurable Max. Current 10-32A
Current 6A up to 1A below max. value
Connector type IEC 62196 Type 2
Means to Disconnect Depending on available input power and cable cross-section – max 40A
Configurable price/kWh calculator (EUR) Default setting: 0.13 (adjustable)
Control type Touch Screen, Web page, GX device over Modbus TCP, VictronConnect via Bluetooth
Light Ring 55 configurable light effects available
Protection External RCD is required
Operating temperature -25°C to +50°C Storage temperature -40 °C to +80 °C Humidity 95%, non-condensing
Data communication ModbusTCP over WiFi, Bluetooth
Enclosure colour Light Blue (RAL 5012)
Power terminals 6-10 mm² / AWG 10-8
Protection category IP44 Ventilation
Safety IEC 61851-1, IEC 61851-22 Detection for Relay Contact welded Detection for missing protective conductor Detection for missing Ground Detection for shorted CP
80-10-011 V.E. EV CHARGING STATION
