INVERTER FRONIUS Single-phase Hybrid PRIMO GEN24 4.0 PLUS 4000W
The Fronius GEN24 Plus hybrid inverter enables energy self-sufficiency for electricity, heating, cooling and e-mobility with the use of a battery system.
This means that the Fronius GEN24 Plus with Full Backup has a backup power solution that can even supply 3-phase loads, such as heat pumps.
What’s more, the Multi Flow Technology lets the hybrid inverter supply parallel energy flows in the system, even in backup power mode.
INPUT DATA
Number of MPP trackers 2
Max. PV input power 4140 W
Max. input current (Idc max) 22 / 12 A
Max. short circuit current, module array* 36 / 19 A
DC input voltage range (Udc min – Udc max) 65 – 600 V
Feed-in start voltage (Udc start) 80 V
Nominal input voltage (Udc,r) 400 V
MPP voltage range (Umpp min – Umpp max) 210 – 530 V
Usable MPP voltage range 65 – 530 V
Number of DC connections 2+2
Max. PV generator power (Pdc max) 6 kWpeak
OUTPUT DATA
AC nominal output (Pac,r) 4000 W
Max. output power (Pac max) 4000 VA
Max. grid power demand 4000 VA
Max. AC output current 25,8 A
Grid connection (Uac,r) 1~ NPE 220/230 V
AC voltage range (Umin – Umax) 155 – 270 V
Frequency (fr) 50 / 60 Hz
Frequency range (fmin – fmax) 45 – 65 Hz
Total harmonic distortion < 2 %
Power factor (cos φac,r) 0,8 – 1 ind,/cap,
Back-up power 1~NPE 220 V / 230 V
Nom. AC-Ausgangsstrom (220VAC) 18,2 A
Nom. AC-Ausgangsstrom (230VAC) 17,4 A
GENERAL DATA
Degree of protection IP66
Protection class 1
Overvoltage category (DC / AC) 1) 2 / 3
Inverter design Transformerless
Cooling Regulated air cooling
Installation Indoor and outdoor installation
Ambient temperature range -40°C – +60°C
Permitted humidity 0 – 100 %
Max. altitude 2) 4000m
DC PV connection technology 4x DC+ and 4x DC- push-in spring terminals 2.5 – 10 mm²
DC battery connection technology 1x BATT+ and 1x BATT- push-in spring terminals 2.5 – 10 mm²
AC connection technology 3 pole AC push-in spring terminals 2.5 – 10 mm² 3 pole backup power push-in spring terminals 1.5mm² – 10mm² 2x PE-screw terminals 2.5 – 16 mm² and 3x 2,5 – 10mm²
Certificates and compliance with standards IEC 62109, IEC 62909, AS/NZS 4777.2, CEI 0-21, ABNT BNR 16149 and 16150, IEC 62116, IEC 61727 8)
Back-up power functions PV Point, full backup 4)
Compatible batteries 6) BYD Battery-Box Premium HVS/HVM & LG RESU FLEX 5)
Interference emission class B
PROTECTION DEVICES
DC insulation measurement Yes
Overload behaviour Operating point shift. Power limitation
DC disconnector Yes
DC Reverse polarity protection Yes
INTERFACES
WLAN / 2x Ethernet LAN Fronius Solar.web, Modbus TCP SunSpec, Fronius Solar API (JSON)
6x digital in/out + 6x digital in Interface to ripple control receiver, energy management
Emergency stop (WSD) Yes
Datalogger and web server Included
2x RS485 Modbus RTU SunSpec (third-party supplier) / Fronius Smart Meter, battery, Fronius Ohmpilot
OUTPUT DATA PV POINT
Max continuous output power 3000 VA
Nom. output current (Iac max) 13 A
Grid connection 1 ~ NPE 220 V / 230 V
Frequency 50 Hz / 60 Hz
Switchover time 90 s
BATTERY CONNECTION
Number of DC connections 1
Max. input current (Idc max.) 22 A
DC input voltage range (Udc min – Udc max) 150 V – 455 V 7)
Max. input / output power (Depending on the connected battery) 4140 W
Max. AC charging power (Depending on the connected battery) 4,000 W
Min. DC input voltage 150 V
Max. DC input voltage 455 V
