Inverter Huawei Three Phase SUN2000-8KTL-M1
The Huawei 8KTL-M1 solar converter is an innovative Huawei solution for solar devices with a three-phase mains connection or without a battery.
Its compact design with reduced size offers flexibility in its installation. Easy control and monitoring in real time.
It also incorporates software designed to achieve the performance of up to 99.5% of solar panels, where the system optimizes the output of each solar panel in the solar system.
With the monitoring system, the control can be managed at unit level (with power optimizers).
For each converter there is a minimum number of power optimizers but without the need to install them on all photovoltaic panels.
In addition to improving the operation of the solar system, Huawei inverters have an APP that allows real-time display
of solar installation parameters, can optimize consumption and improve the efficiency of the photovoltaic system.
It is connected to the inverter via Dongle wirelessly or wired (ethernet).
Three-phase converter with power 8.800VA
2 independent MPP trackers
1 battery connection (plug & play) for LUNA2000 ESS 5-15kWh
Yield up to 98.6%
Compatible with SUN2000-450W-P module optimizer
Communication via WLAN / Ethernet & 4G / LTE *
Free system monitoring with FusionSolar
RS485 for Smart Power Sensor & LUNA2000 ESS 5-15kWh
Built-in AC and DC surge protection TYPE II
Built-in PID recovery
Degree of protection IP65
Recommended maximum power of PV 1: 12,000 Wp
Maximum input voltage 2: 1,100 V
Operating voltage range 3: 140 V ~ 980 V
Starting voltage: 200 V
Rated input voltage: 600 V
Maximum input current per MPPT: 11 A
Maximum short circuit current: 15 A
Number of MPP trackers: 2
Maximum number of inputs per MPPT: 1
Huawei SUN2000-8KTL-M1 – Input (DC battery)
Compatible battery: HUAWEI Smart String ESS 5kWh – 30kWh
Operating voltage range: 600 V ~ 980 V
Maximum operating current: 16 A.
Maximum charging power: 10,000 W.
Maximum discharge power: 8,800 W.
Exit DC (On the network)
Network connection: three-phase
Rated power: 8,000 W.
Maximum apparent power: 8,800 VA
Rated output voltage: 220 Vac / 380 Vac, 230 Vac / 400 Vac, 3W / N + PE
AC mains frequency: 50 Hz / 60 Hz
Maximum output current: 13.5 A.
Total harmonic distortion (THD): ≤ 3%
Protection and operation:
DC switch disconnector: Yes
Islet grid detection: Yes
DC reverse polarity protection: Yes
Insulation monitoring: Yes
DC surge protection: Yes, compatible with TYPE II protection according to EN / IEC 61643-11
AC surge protection: Yes, compatible with TYPE II protection according to EN / IEC 61643-11
Residual current monitoring: Yes
AC surge protection: Yes
AC short circuit protection: Yes
Arc detection: yes
Ripple control receiver inputs: Yes
Built-in PID recovery: Yes
Ability to charge the battery from the network: Yes
Safety standards: EN / IEC 62109-1, EN / IEC 62109-2, IEC 62116
Network connection standards: G98, G99, EN 50438, CEI 0-21, VDE-AR-N-4105, AS 4777, C10 / 11, ABNT, UTE C15-712, RD 1699, TOR D4, NRS 097-2-1 ,
IEC61727, IEC62116, DEWA
Included in the package:
Signal cable socket
Dimensions: 525 x 470 x 166mm
Weight: 17 kg
* Any DC input voltage above the operating voltage range can lead to faulty operation.