Solarnet SOL 200 / 2.5m² Glass Triple Energy Selective Titanium Collector
1. GUARANTEED RESISTANCE TO COASTAL AREAS
With an anodized aluminum exterior lining, highly resistant to UV rays and marine humidity, the ASSOS solar water heater is guaranteed to withstand wet climates and areas near the sea.
2. ASSOS SOLAR HEATING DOES NOT FREEZE
The innovative design of the closed-loop mantle guarantees its operation in freezing conditions and at the same time the antifreeze liquid protects the solar panels from being clogged with salts.
3. MORE HOT WATER FOR WINTER MONTHS
The strong polyurethane insulation of the container, 50 mm thick and 40 kgm / m υψηλής high density, ensures more hot water use, even in freezing conditions, if the outside temperature reaches 3 ° C below zero.
4. DOUBLE DURATION OF LIFE
The 2.5mm-thick metal container construction according to DIN 4800-5 ensures twice the resistance of the water tank at high network pressures compared to most common solar water heaters.
5. GUARANTEED TOLERANCE OF THE CONTAINER IN HARD WATER
In the automatic sandblasting complex, the inner surface is pre-treated and dried, with natural sand, without any chemicals. This pre-treatment ensures the perfect adhesion of the steel to the glass (DURO SMALT ELASTIC). Thus, the ASSOS BOILERS GLASS solar water heater gets a very long life, even in areas with “hard water” and high salt content.
6. THIRD ENERGY SOLAR HEAT – HOT WATER AND OVERCOMING
You can (on request) add a back-up heating element to the solar water heater’s electrical resistance, which can be connected to the radiator’s water circuit and can be switched on when it is overcast, saving you a lot of money.
7. ASSOS SOLAR COLLECTOR IS THREE TOLERANCE
Common solar water heaters usually do not have ventilation holes. As a result (especially in humid climates) water vapor effects are created inside the collectors due to the temperature difference, and as a result these water vapor corrodes the collector absorber. The profile of the solar collector is provided with 4 ventilation holes, which are completely waterproof. This prevents rainwater from entering, thus protecting the solar collector from internal corrosion.
8. WELDING WITH THE ULTRASONIC METHOD
The absorbers of the ASSOS solar panels are made of copper channels and titanium surface and are autogenously welded by ultrasonic method (high molecular welding). This innovative method of continuous welding ensures the collector seamless heat transfer and offers durability.
9. ASSOS SOLAR COLLECTOR VALUES DIRECT & INDIRECT SOLAR RADIATION
The special SOLAR TEMPERED GLASS unbreakable crystal of the solar collector ASSOS and the titanium-coated copper surface offer the lowest possible loss of reflection from solar and make it a high-efficiency solar collector.
10. STABLE PERFORMANCE OF THE COLLECTOR WITHOUT LOSSES
Double insulation of 20mm from fiberglass and 35mm from rock wool ensures high collector performance and minimizes heat loss.
11. RELIABILITY – SECURITY – PREVENTION
The 4mm-thick TEMPERED GLASS safety glass provided by ASSOS solar collectors offers hail resistance and accident prevention, following strict international safety standards.
12. EASY TO FIT – MODERN APPEARANCE
The designed aluminum base and the copper connecting side protective covers, combined with the excellent exterior design of the device, offer the possibility of easy, secure and tangible placement of the solar water heater in a tiled roof and harmonized.
13. MAINTENANCE INNOVATION
The large cleaning flange Φ120 makes it easy to replace the magnesium rod and clean the tank from the salts. ASSOS BOILERS solar water heaters are manufactured to the strictest international standards and are inspected at every production stage. The SPECIFIC QUALITY AND CONTROL IDENTIFICATION mark bearing all parts of the device certifies that they have undergone rigorous testing to ensure high quality.
Specifications :
Dimensions and Weight:
• Dimensions of the water heater (boiler): 530 x 1320 (mm)
• Collector Dimensions (Y x W x B): 2050 x 1250 x 90 (mm)
• Total Weight (Kg): 140 kg
• Exterior housing: Anodized aluminum
• Tank insulation: 40 – 60 thick polyurethane
1. GUARANTEED RESISTANCE TO COASTAL AREAS
With an anodized aluminum exterior lining, highly resistant to UV rays and marine humidity, the ASSOS solar water heater is guaranteed to withstand wet climates and areas near the sea.
2. ASSOS SOLAR HEATING DOES NOT FREEZE
The innovative design of the closed-loop mantle guarantees its operation in freezing conditions and at the same time the antifreeze liquid protects the solar panels from being clogged with salts.
3. MORE HOT WATER FOR WINTER MONTHS
The strong polyurethane insulation of the container, 50 mm thick and 40 kgm / m υψηλής high density, ensures more hot water use, even in freezing conditions, if the outside temperature reaches 3 ° C below zero.
4. DOUBLE DURATION OF LIFE
The 2.5mm-thick metal container construction according to DIN 4800-5 ensures twice the resistance of the water tank at high network pressures compared to most common solar water heaters.
5. GUARANTEED TOLERANCE OF THE CONTAINER IN HARD WATER
In the automatic sandblasting complex, the inner surface is pre-treated and dried, with natural sand, without any chemicals. This pre-treatment ensures the perfect adhesion of the steel to the glass (DURO SMALT ELASTIC). Thus, the ASSOS BOILERS GLASS solar water heater gets a very long life, even in areas with “hard water” and high salt content.
6. THIRD ENERGY SOLAR HEAT – HOT WATER AND OVERCOMING
You can (on request) add a back-up heating element to the solar water heater’s electrical resistance, which can be connected to the radiator’s water circuit and can be switched on when it is overcast, saving you a lot of money.
7. ASSOS SOLAR COLLECTOR IS THREE TOLERANCE
Common solar water heaters usually do not have ventilation holes. As a result (especially in humid climates) water vapor effects are created inside the collectors due to the temperature difference, and as a result these water vapor corrodes the collector absorber. The profile of the solar collector is provided with 4 ventilation holes, which are completely waterproof. This prevents rainwater from entering, thus protecting the solar collector from internal corrosion.
8. WELDING WITH THE ULTRASONIC METHOD
The absorbers of the ASSOS solar panels are made of copper channels and titanium surface and are autogenously welded by ultrasonic method (high molecular welding). This innovative method of continuous welding ensures the collector seamless heat transfer and offers durability.
9. ASSOS SOLAR COLLECTOR VALUES DIRECT & INDIRECT SOLAR RADIATION
The special SOLAR TEMPERED GLASS unbreakable crystal of the solar collector ASSOS and the titanium-coated copper surface offer the lowest possible loss of reflection from solar and make it a high-efficiency solar collector.
10. STABLE PERFORMANCE OF THE COLLECTOR WITHOUT LOSSES
Double insulation of 20mm from fiberglass and 35mm from rock wool ensures high collector performance and minimizes heat loss.
11. RELIABILITY – SECURITY – PREVENTION
The 4mm-thick TEMPERED GLASS safety glass provided by ASSOS solar collectors offers hail resistance and accident prevention, following strict international safety standards.
12. EASY TO FIT – MODERN APPEARANCE
The designed aluminum base and the copper connecting side protective covers, combined with the excellent exterior design of the device, offer the possibility of easy, secure and tangible placement of the solar water heater in a tiled roof and harmonized.
13. MAINTENANCE INNOVATION
The large cleaning flange Φ120 makes it easy to replace the magnesium rod and clean the tank from the salts. ASSOS BOILERS solar water heaters are manufactured to the strictest international standards and are inspected at every production stage. The SPECIFIC QUALITY AND CONTROL IDENTIFICATION mark bearing all parts of the device certifies that they have undergone rigorous testing to ensure high quality.
Specifications :
Dimensions and Weight:
• Dimensions of the water heater (boiler): 530 x 1320 (mm)
• Collector Dimensions (Y x W x B): 2050 x 1250 x 90 (mm)
• Total Weight (Kg): 140 kg
• Exterior housing: Anodized aluminum
• Tank insulation: 40 – 60 thick polyurethane
