Solar SIFAKIS 200 / 2.62m² Glass Selective Dual Energy Titanium
Guaranteed resistance next to the sea
The outer coating of the SIFAKIS Solar is made of anodized aluminum, particularly resistant to ultraviolet rays, in humid climates and in coastal areas. The unique polygonal design that it has, offers twice the mechanical resistance to the external lining of the tank.
SIFAKIS Solar does not freeze.
The innovative design of the jacket for the closed circuit it has guarantees its stable operation even in frost and at the same time it protects the collectors from the risk of clogging by salts.
Solar SIFAKIS Ensures More Water for the winter
The strong 50 mm thick polyurethane insulation and high density 40 Kg/m3 ensure for the consumer more hot water for use even if the outside temperature is 30 degrees C below zero.
Twice the lifespan
The metal construction of its tank is 3 mm and is made according to DIN 4800-5. This means twice the resistance of the tank to high network pressures compared to most common solar water heaters.
Guaranteed resistance of the container to hard water
GLASS solar water heaters – The internal protection of the container is achieved with DURO SMALT ELASTIC. This innovative method of protection is considered the most appropriate for its resistance to very hard water and its elastic properties, allow it to follow the contractions-expansions of the tank, thus avoiding the risk of cracks created in most tanks with different enamel protection.
The SIFAKIS Solar collector has three times the strength
Most almost solar collectors, due to incomplete design, do not have ventilation holes, resulting in the creation of water vapor phenomena inside them in winter (especially in humid climates) due to the temperature difference, resulting in corrosion of the absorber of the collector. Its profile has 4 ventilation holes that are covered in a completely waterproof manner so as not to allow the entry of rainwater.
SIFAKIS Solar reacts better
Because the absorber is made of a single sheet with a titanium coating and copper pipes that are welded by the Ultrasonic method (with high frequencies). With this innovative welding method, absolute heat transfer is achieved and allows the solar collector to have the highest possible efficiency.
The SIFAKIS Solar Collector utilizes direct and indirect radiation
The single titanium-coated surface of the solar collector combined with the SOLAR TEMPERED GLASS and the special crystals it has, minimize the reclassification of direct radiation and make the collector the only high-performance collector.
Stable performance without loss
The double insulation of 40 mm of stone wool and 20 mm of glass wool which is placed laterally ensures the high efficiency and minimizes the losses of the solar collector.
Safety Reliability Prevention
In almost all countries of the world, all solar panels have unbreakable safety glass for hail resistance and accident prevention purposes. The SIFAKIS solar collector has a special 3.5 mm TEMPERED GLASS following strict international safety regulations.
Great look – Easy to install
The excellent external design of the device in combination with the designed support base and the side protective covers of the connection pipes, offer the possibility of easy installation, they fit perfectly with any building architecture.
Innovation in maintenance
The independent position of the magnesium rod allows for quick and easy replacement.
Boiler technical characteristics
Outer casing: Anodized aluminum
Tank insulation: Polyurethane 40 – 60 mm thick.
Roller material: Low carbon steel 2.5 mm.
Jacket material: Low carbon steel 1.5 mm.
Internal tank protection: Enamelling
Additional protection : Magnesium rod
Electrical resistance: Copper
Thermostat : Bipolar four contacts
Resistance power : Available from 0.8 KWw to 4 KW
Collector technical characteristics
Outer casing: Anodized aluminum profile
Collector back: Galvanized sheet 0.4 mm.
Back insulation: Stone wool 35 mm.
Side insulation: Glass wool 20 mm.
Absorber : Single sheet with selective titanium coating
Absorber piping: Copper pipes Φ 10 & Φ 22
Transparent cover: Safety Glass (Solar Tempered Glass)
Sealing material: EPDM rubber, Transparent Silicone
Type SIFAKIS 200 Glass Dual Energy Selective Titanium
Roof or Tile Roof
Tank capacity (lt): 200
Dimensions (mm): 570 x 1320
Weight (kg): 65
Cylinder pressure test (bar): 10
Dimensions (mm): 2050x1275x90
Number of Collectors: 1
Collector Surface (m2): 2.62
Weight per Collector (kg): 45
Pressure test (bar): 1